Thread module, ZigBee Module, Border Router, End-Device, EFR32MG24 → Mesh Network, BLE Commissioning, Samsung SmartThings Station, Google Home/Nest, Apple HomeKit
EDT2400R-SA for Router or End-Device
EDT2400R-SA는 Silicon Labs의 Thread/ZigBee Chipset(SoC), EFR32MG24를 적용한 Thread/ZigBee + BLE Combo Module 이며,
Thread Router 와 함께 End-Device 기능을 지원한다.
이 모듈은 SmartThings Station(스마트싱스 스테이션), Google Home/Nest, Apple HomeKit에 연동하여 사용할 수 있다.
15 x 23 x 2.2 mm
1. Features
Items | Features |
Core MCU | 32-bit ARM® Cortex®-M33 core |
78MHz @ Maximum Operating Frequency | |
1536 KB @Flash | |
256 KB @RAM | |
Secure Vault (Secure Boot, TRNG, Secure Key Management, etc…) | |
Wireless | Thread @OpenThread, Matter support |
BLE5.3 @Thread commissioning, mesh support | |
ZigBee Support | |
-105 dBm @Min Sensitivity | |
19.5 dBm @Max TX Power | |
On-Board Antenna or UFL/IPEX Antenna Connector | |
Operating Condition | 1.3uA @ Deep Sleep Mode |
5mA @ RX Mode Current | |
19/160mA @ 10/19dBm Output Power | |
1.8 V to 3.8 V @ Operating Voltage | |
-25 °C to 85 °C, (Optional) -40 °C to 125 °C | |
Peripherals | GPIO, UART, SPI, I2C, PWM, ADC/DAC |
Dimension | 15 x 23mm |
2. Pysical Dimeinsion
![]() |
3. PCB PAD Recommendation
![]() |
4. Target Board Installation Guide
![]() |
5. Example Schematic
![]() |
|
![]() |
![]() |
5. Documents
![]() |
Datasheet | § Datasheet_EDT2400-SA_REV0.9 |
![]() |
EVB Schematic | § EVB_EDT2400-SA_20230319 |