ZigBee Module, Matter, Thread Module, EFR32MG24, Sleepy End Device → Smartthings Station, Google Home/Nest, HomeKit
EDT2400L-SA for Sleepy End-Device
ZigBee Module & Thread Module로 사용하는 EDT2400L-SA는 Matter IoT 응용에도 적합하게 설계되었다.
Thread를 활용하는 Matter IoT에서 EDT2400L-SA는 Sleepy End-Device를 기능을 지원하고 있으며,
SmartThings Station, Google Home/Nest, Apple HomeKit에 연결하여 사용할 수 있다.
15 x 23 x 2.2mm
1. Features
| Items | Features |
| Core MCU | 32-bit ARM® Cortex®-M33 core |
| 78MHz @ Maximum Operating Frequency | |
| 1536 KB @Flash | |
| 256 KB @RAM | |
| Secure Vault (Secure Boot, TRNG, Secure Key Management, etc…) | |
| Wireless | Thread @OpenThread, Matter support |
| BLE5.3 @Thread commissioning, mesh support | |
| ZigBee Support | |
| -105 dBm @Min Sensitivity | |
| 19.5 dBm @Max TX Power | |
| On-Board Antenna or UFL/IPEX Antenna Connector | |
| Operating Condition | 1.3uA @ Deep Sleep Mode |
| 5mA @ RX Mode Current | |
| 19/160mA @ 10/19dBm Output Power | |
| 1.8 V to 3.8 V @ Operating Voltage | |
| -25 °C to 85 °C, (Optional) -40 °C to 125 °C | |
| Peripherals | GPIO, UART, SPI, I2C, PWM, ADC/DAC |
| Dimension | 15 x 23mm |
2. Pysical Dimeinsion
 |
3. PCB PAD Recommendation
 |
4. Target Board Installation Guide
 |
5. Example Schematic
 |
|
 |
 |
5. Documents
 |
Datasheet | § Datasheet_EDT2400L-SA_REV0.9 |
|
EVB Schematic | § Schematic_EVB_EDT2400X-SA_20230319 |
